Easy
DIY peel and stick tile concept of mosaic sticker tile is made of
an adhesive substrate topped with a gel component called epoxy resin,
the embossed 3d epoxy resin offers stunning visual impact. the tiles are
thin and light, they can be installed in minutes over a clean and sleek
surface without any mess or specialized tools, and never crack with
time.Bathroom backsplash wall tile is also an economic wall covering
material, if you are getting tiled of the same design, just peel them
off and change a new style. Art3dTM mosaic sticker offers veracious
collections to meet you different taste.Bathroom backsplash wall tiles
are lightweight, easy to handle, cut and maintain, they will remain on
your walls for as long as you wish them to be. The tiles can also be
easily installed directly over existing panels or smooth surface.
Especially designed for kitchen backsplashes and bathroom backsplashes,
the tiles are resistant to the heat of stovetops and the humidity of
bathrooms (do not use in shower).
3D
Effect-The embossed 3D PU gel provide you with strong 3D visual
effect and the adhesive substratum can stick firmly on the wall
Safe
and Stylish-Made of Eco-friendly material; Proved to be safe for
people’s health; Non-toxic; Anti-bacterial; Anti-mold; Heat and humidity
resistant
Apply Easily-No grout; No mess; Simply measure, cut (if necessary), peel and stick on any smooth, clean and non-porous surface
Smart
Dresser-Suitable for your kitchen (mostly backsplash) and bathroom (do
not use in shower), or any smooth surface you wish to change into
stylish
Size of tile :
285 * 305mm (12″ X 12″),
A17042P6 (6sheets), A17042P10(10sheets)
Easy Do It Yourself
1. Wash the surface and grout lines with a
powerful grease remover and wait for it to dry.
2. Measure and mark the self-adhesive backsplash
tile.
3. If necessary, cut the peel and stick tiles
using a cutter or sharp scissors.
4. Now align and stick the Art3d Tiles at your
own pace.
Ideal surfaces to install Art3d Tiles:
– Painted gypsum (after a 21-day curing time for
fresh paint)
– Smooth ceramic tile
– Wall panel (acrylic)
– Wall linoleum
– Mirror
– Wallpaper
Kindly Remind
–
Tiles should not directly contact with flames, steam or submerse in
water. Do not install tiles less than 16 inches away from the top of
stove.
-Rough surfaces such as porous wood, embossed ceramic tiles or textured wallpaper are not suitable to install.
– The curing period is 2 days after you install them on your wall (21 days for the freshly painted walls).
– The new arrived peel and stick wall tiles may have little gel smell. The smell will disappear in 2-3 days.
–
If you want to remove the tile, you could use a hair dryer to warm up
the adhesive and pull softly starting with the corners.Then use a
cleaning product to remove the excess glue left by the peel and stick
tiles.
Notes:
The wall surface are all in aged paint with loosen debris which is definitely not recommended for direct application.
Please repair the wall by sanding the aged paint and applying a new coat of basic primer first.
And for corner application, it should be sharped by two separate tiles, please do not cover it with one whole sheet！